Difference between revisions of "Start Up Procedure/Proficiency - COM 118"

From Help Wiki
(Created page with " *Log In the logbook *Use the LG Display Remote to turn on Display monitors *Turn ON the Power Bar on the right/bottom rack *Turn ON and login to the computer *Power ON Apollo...")
 
Line 1: Line 1:
 +
===Signal Tracing / Proficiency Check List - COM 118===
 +
#Log into the logbook
 +
#Explain the simple room flow
 +
#Explain the norms from the NEVE to the Apollos
 +
#Use the LG Display Remote to turn on Display monitors
 +
#Turn ON and login to the computer
 +
#Turn ON the two Power Bars below the Apollos and on the rack
 +
#Power ON Apollo A Interface (wait to load: HOST, INT, 48)
 +
#Power ON Apollo B interface (wait to load: HOST, EXT, 48)
 +
#Make new folder with your name in the Storage drive
  
−
*Log In the logbook
+
#Go through the signal flow of an input channel
−
*Use the LG Display Remote to turn on Display monitors
+
#Explain when you would put the channel in TAPE
−
*Turn ON the Power Bar on the right/bottom rack
+
#Patch a source into an input channel of the NEVE
−
*Turn ON and login to the computer
+
#Explain the channel Cue function and master Cue section of the NEVE
−
*Power ON Apollo A Interface (wait to load: HOST, INT, 48)
+
#Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume
−
*Power ON Apollo B interface (wait to load: HOST, EXT, 48)
+
#Open '''Digital Performer'''
−
*Run ITunes
+
−
*Select '''Apollo A Monitor Out Ext. 1''' on NEVE console Control Room monitor select
+
−
*Play a son in ITunes to check monitor sound is working
+
−
*Open '''Digital Performer'''
+
−
#Make new folder with your name on it in Storage, Save
+
 
#Select - New - 118 Multitrack Template
 
#Select - New - 118 Multitrack Template
−
#add a soundbite to the soundbites window and add it to a track
+
#Record the source that's on the NEVE
−
#route it to NEVE channel 1
+
#Explain the Cue function in DP and where the Cue sends go on the NEVE
−
#monitor stereo and cue levels on NEVE
+
#Monitor and adjust the Cue send level in DP and on the NEVE
−
#provide playback and live cue 1
+
#Patch the recorded channel into the Portico module (Channel 6)
−
#Patch two recorded channels thru Portico modules channels 6 & 7
+
 
−
#Mix to stereo in DP
+
#Run ITunes
−
*Normalize board
+
#Select "Apollo A Monitor Out Ext. 1" On NEVE console Control Room monitor select
−
*Shutdown studio
+
 
−
*Logout
+
#Normalize board
 +
#Shutdown studio
 +
#Logout
  
 
[[Category:COM 118]]
 
[[Category:COM 118]]

Revision as of 15:03, 19 October 2015

Signal Tracing / Proficiency Check List - COM 118

  1. Log into the logbook
  2. Explain the simple room flow
  3. Explain the norms from the NEVE to the Apollos
  4. Use the LG Display Remote to turn on Display monitors
  5. Turn ON and login to the computer
  6. Turn ON the two Power Bars below the Apollos and on the rack
  7. Power ON Apollo A Interface (wait to load: HOST, INT, 48)
  8. Power ON Apollo B interface (wait to load: HOST, EXT, 48)
  9. Make new folder with your name in the Storage drive
  1. Go through the signal flow of an input channel
  2. Explain when you would put the channel in TAPE
  3. Patch a source into an input channel of the NEVE
  4. Explain the channel Cue function and master Cue section of the NEVE
  5. Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume
  6. Open Digital Performer
  7. Select - New - 118 Multitrack Template
  8. Record the source that's on the NEVE
  9. Explain the Cue function in DP and where the Cue sends go on the NEVE
  10. Monitor and adjust the Cue send level in DP and on the NEVE
  11. Patch the recorded channel into the Portico module (Channel 6)
  1. Run ITunes
  2. Select "Apollo A Monitor Out Ext. 1" On NEVE console Control Room monitor select
  1. Normalize board
  2. Shutdown studio
  3. Logout
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&oldid=26774"

The Evergreen State College