View source for Template:AVclassroom template podTLP350

__NOTOC__
[[File:4107.pdf]]

===Starting===
#Press any of the source buttons on the AV Control Panel to start the projector(s) and turn on the system

===Computer===
# Press the ‘Computer’ button on the AV Control Panel.
# Select the option you want from the touch screen on the AV Control Panel ‘Mac Mini,’ ‘VGA,’ or ‘HDMI’.
# Attach the VGA or HDMI cables to your laptop; make sure to plug in the audio plug on the VGA cable to the laptop's earphone jack for VGA.
 
===Document Camera===
# Press the ‘Document Camera’ button on the console attached to the podium.
# Turn on the Document Camera. Be patient, this can take up to a minute to warm up.

===Bluray===
# Press the ‘Bluray’ button on the console attached to the podium.
# On the Bluray player, press the open button to load your disc.
# The Bluray player can also play DVD and CD discs.

===VCR/DVD===

# Press the ‘VCR/DVD’ button on the console attached to the podium.
# Select either VCR or DVD from the touch screen on the AV Control Panel.
# Insert VHS or DVD.
# The DVD player will also play CDs.
# The DVD player will not toast round food.

===Music===

# Press the ‘Music’ button on the AV Control Panel.
# Attach the VGA audio cable to the headphone port on your device.
# Make sure the device volume is turned up, and while playing something, adjust listening level with the volume knob on the AV Control Panel.

===Microphones===

# Press the ‘Mic Only’ button on the AV Control Panel.
# Use either the wired or wireless microphone.
# Adjust the volume on the mics through the touch screen panel. 
# Microphone volume is separate from the main volume for AV sources (control mics from 'mic only', control everything else with the volume knob.
# Muting microphones is done with the mutes on this screen

===Mute All===

# Press the ‘Mute All’ button on the AV Control Panel.
# The image should turn black and the accompanying sound become muted. 
# Press ‘Mute All’ again to 'unmute'.

===Finishing Up===
Remember to turn things off when you are done!
# Press the ‘System Off’ button on the console attached to the podium.
# '''Press ‘Power Down’ to turn off the projector(s) and system.'''

===Troubleshooting:===

No picture?:
:- Try pressing 'Mute All' and then pressing again to unmute
:- Is data projector turned on? (try starting again, & call x6270)
:- Is the cable firmly connected to the laptop (or adapter, and adapter to laptop)

No audio?:
:- Is volume on AV control panel turned up enough to hear?
:- Laptop: Is the volume on the laptop turned up and source selected? (HDMI button for HDMI connection, etc?)