Difference between revisions of "02R-APOLLO-PROTOOLS Cheat Sheet"

Revision as of 10:15, 2 July 2024

Directions for using the Yamaha 02R Console:

Locate Scene memory > Press Display > Toggle to Scene 95 or 96 > Press Recall
- Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.

(Mic panels in 1362 are normalized to the inputs of 02R MIC/LINE inputs)

02R - find Layer section and select Layer 1-24
Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.)
Push fader up and you should see levels on the Meters
Push up stereo fader (Main Mix fader)
On the Control Room section, select STEREO
Turn up Control Room Level light grey knob to control speaker volume
Open Pro Tools and choose the API Stereo template; save to Storage drive in your folder with your name on it.
On Layer 25-48 of the O2R, channels 33 and 34 are the MAIN L/R OUT of Pro Tools (Main Out L/R comes out of outputs 9/10 of the Apollo X16).

Headphone Mixes

Use the Encoder knobs on the 02R to control headphone volume
In the Encoder Mode section select AUX
- Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2
Use the Encoder knob on your LIVE channel to control volume to the headphones
Use the Encoder knob on channels 33 and 34 to control volume from Pro Tools Main L/R

@@ Line 22: / Line 22: @@
 *Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones
 *Use the Encoder knob on channels 33 and 34 to control volume from Pro Tools Main L/R
 [[Category: Audio Lab]]
 [[File:02R cheat sheet 2024.pdf|left|thumb]]