Difference between revisions of "Start Up Procedure/Proficiency - COM 118"
From Help Wiki
m (→START UP PROCEDURES) (Tag: VisualEditor) |
m (→SIGNAL FLOW) (Tag: VisualEditor) |
||
| Line 17: | Line 17: | ||
#Patch a line-level source into an input channel of the NEVE | #Patch a line-level source into an input channel of the NEVE | ||
#Listen to that source via the ''Stereo Bus'' | #Listen to that source via the ''Stereo Bus'' | ||
| − | #Explain the channel Cue function and master Cue section of the NEVE | + | #Explain the channel Cue function and master Cue section of the NEVE (AKA "''Aux Sends''") |
#Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume | #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume | ||
#Open '''Digital Performer''' | #Open '''Digital Performer''' | ||
| Line 23: | Line 23: | ||
#Record the source that's on the NEVE | #Record the source that's on the NEVE | ||
#Listen to the outputs of Digital Performer (Can listen from "Apollo Monitor" source, or can send Ch. 21/22 to ''Stereo Bus'') | #Listen to the outputs of Digital Performer (Can listen from "Apollo Monitor" source, or can send Ch. 21/22 to ''Stereo Bus'') | ||
| + | #Patch live mic to NEVE Penthouse MIC input | ||
| + | #Trim mic and check levels in DP | ||
#Explain the Cue function in DP and where the Cue sends go on the NEVE | #Explain the Cue function in DP and where the Cue sends go on the NEVE | ||
| − | # | + | #Supply talent with Headphone mix of pre-recorded and live material (via "''Cues''," AKA "''Aux Sends"'') |
| + | #Record to DP | ||
| + | #SAVE | ||
===MONITORING SECTION=== | ===MONITORING SECTION=== | ||
Revision as of 09:25, 30 September 2019
START UP PROCEDURES
- Log into the logbook
- Explain the simple room flow
- Explain the norms from the NEVE to the Apollos
- Turn ON Power Bar at the bottom of the rack (to the right of the Neve)
- Apollo A should then Power ON. If not, Power ON Apollo A Interface (wait to load: HOST, INT, 48)
- Power ON Apollo B interface (wait to load: HOST, EXT, 48)
- Use the LG Display Remote to turn on Display monitors
- Turn ON and login to the computer
- OPTIONAL: Make a new folder with your name on it in the Storage drive
- (Storage drive folders are accessible to all users of the computer; anyone can modify or delete files here, but it is a good way to turn in assignments or share files with classmates).
SIGNAL FLOW
- Go through the signal flow of an input channel
- Explain when you would put the channel in TAPE
- Patch a line-level source into an input channel of the NEVE
- Listen to that source via the Stereo Bus
- Explain the channel Cue function and master Cue section of the NEVE (AKA "Aux Sends")
- Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume
- Open Digital Performer
- Select - New - 118 Multitrack Template
- Record the source that's on the NEVE
- Listen to the outputs of Digital Performer (Can listen from "Apollo Monitor" source, or can send Ch. 21/22 to Stereo Bus)
- Patch live mic to NEVE Penthouse MIC input
- Trim mic and check levels in DP
- Explain the Cue function in DP and where the Cue sends go on the NEVE
- Supply talent with Headphone mix of pre-recorded and live material (via "Cues," AKA "Aux Sends")
- Record to DP
- SAVE
MONITORING SECTION
- Show where the monitor switches are
- Explain what Apollo A Monitor Out Ext. 1 monitors
- Run iTunes to hear a song
- Explain what ST monitoring is
- Explain what Cue 1/2 monitoring is
SHUT DOWN PROCEDURES
- Normalize board
- Clear Patchbay
- Turn OFF Apollo B
- Power OFF the power switch and the Display monitors
- Log out of the logbook
