Difference between revisions of "Loudness Meter"

From Help Wiki
(Premiere Pro)
 
(7 intermediate revisions by the same user not shown)
Line 8: Line 8:
  
 
===== Premiere Pro =====
 
===== Premiere Pro =====
We need to add the effect to the Master fader in the Audio Track Mixer to measure the entire mix.
+
We need to add the effect to the Mix track fader in the Audio Track Mixer to measure the entire mix.
 
# Go to '''Window > Audio Track Mixer'''
 
# Go to '''Window > Audio Track Mixer'''
 
# Click the '''Show/Hide Effects and Sends''' button (>) on the top left of the '''Audio Track Mixer'''
 
# Click the '''Show/Hide Effects and Sends''' button (>) on the top left of the '''Audio Track Mixer'''
# Go to the Master Fader and select the 5th insert slot
+
# Go to the '''Mix Track''' fader and select the 5th insert slot
# Go to '''Special > Loudness Radar'''
+
# Go to '''Special > Loudness Meter'''
# Double click the '''Loudness Radar''' to open the interface.
+
# Right-click on Loudness Meter and set to Post-Fader
 +
# Double click the '''Loudness Meter''' to open the interface.
  
 
===== Audition =====
 
===== Audition =====
In a '''Multitrack Session''' the '''Loudness Radar''' can be added to the '''Master''' fader in the '''Mixer.'''
+
In a '''Multitrack Session''' the '''Loudness Meter''' can be added to the '''Mix Track''' fader in the '''Mixer.'''
 
# Open a Multitrack Session
 
# Open a Multitrack Session
 
# Go to '''Window > Mixer'''
 
# Go to '''Window > Mixer'''
# Go to the '''Master''' fader and select the last insert
+
# Go to the '''Mix Track''' fader and select the last insert
# Go to '''Special > Loudness Radar'''
+
# Go to '''Special > Loudness Meter'''
# The '''Loudness Radar''' interface should open
+
# The '''Loudness Meter''' interface should open
  
==== Using the Loudness Radar ====
+
==== Using the Loudness Meter ====
  
===== Settings =====
+
===== Presets =====
 
+
Use the '''Presets''' menu to select a metering preset.
===== In the '''Loudness Radar''' click the '''Settings''' tab =====
+
* ATSC A/85 LKFS
# Set the '''Target Loudness''' to '''-16.0''' by dragging the slider
+
** Target Loudness -24 LUFS
# Click on the '''Radar''' tab
+
** For broadcast
 +
* YouTube
 +
** -14 LUFS
 +
** For YouTube
  
 
===== Interface =====
 
===== Interface =====
The '''Loudness Radar''' measure loudness overtime with 4 rings.
+
* '''Input''': Indicates level of the audio signal that takes inter-sample peaks into account.
* The outer ring is when the audio is over the target.
+
* '''Short-Term''': Uses a sliding time window of 3 seconds, describing a more averaged, less event-dependent loudness of the past 3 seconds.
* The second ring is when the audio is in the target range
+
* '''Integrated''': Averages the program from start to finish, describing the loudness of the whole program.
* The other two rings are when the audio is below the target
+
* '''Momentary''': Uses a sliding time window of 400 ms, best describes the instantaneous loudness
* Try to keep the audio in the second ring with some peaks into the first ring
+
* The number in the lower right indicates the average level of the mix
+
* The curved arrow in the top right resets the measurement
+
  
 
===== Measuring Loudness =====
 
===== Measuring Loudness =====
 
# Play the project
 
# Play the project
# Watch the average level in the corner
+
# Watch the '''Integrated''' level to measure the entire program
# Watch how the audio fills in the rings
+
# Watch the '''Short-Term''' level to get a 3 second average.
# Adjust the mix to audio in the second ring with some peaks into the first ring
+
  
 
==== Additional Resources ====
 
==== Additional Resources ====
* [https://helpx.adobe.com/premiere-pro/user-guide.html/premiere-pro/using/loudness-radar.ug.html Measure audio using the Loudness Radar effect]
+
* [https://helpx.adobe.com/premiere-pro/user-guide.html/premiere-pro/using/loudness-radar.ug.html Measure audio using the Loudness Meter effect]
 
** Adobe Article
 
** Adobe Article
* [https://premierebro.com/blog/how-to-measure-loudness-in-premiere-pro How To Measure Loudness In Premiere Pro]
 
** Premiere Pro User Blog
 
 
* [https://www.tcelectronic.com/loudness-explained.html Loudness Explained]
 
* [https://www.tcelectronic.com/loudness-explained.html Loudness Explained]
 
** T.C. Electronics article
 
** T.C. Electronics article

Latest revision as of 09:43, 10 February 2022

The Loudness Meter is an audio effect that measures the loudness of the audio. It does not change the audio.

What is Loudness

Loudness is the perceived volume of an audio recording. The audio meters in Premier Pro measure the peak or instantaneous audio levels. The Loudness Meter measures the average level over time which is a better way to evaluate the overall loudness of a mix.

Adding the Loudness Meter

The Loudness Meter is an audio effect available in Premiere Pro and Audition. It in only tool to measure the loudness level. It does not change the audio.

Premiere Pro

We need to add the effect to the Mix track fader in the Audio Track Mixer to measure the entire mix.

  1. Go to Window > Audio Track Mixer
  2. Click the Show/Hide Effects and Sends button (>) on the top left of the Audio Track Mixer
  3. Go to the Mix Track fader and select the 5th insert slot
  4. Go to Special > Loudness Meter
  5. Right-click on Loudness Meter and set to Post-Fader
  6. Double click the Loudness Meter to open the interface.
Audition

In a Multitrack Session the Loudness Meter can be added to the Mix Track fader in the Mixer.

  1. Open a Multitrack Session
  2. Go to Window > Mixer
  3. Go to the Mix Track fader and select the last insert
  4. Go to Special > Loudness Meter
  5. The Loudness Meter interface should open

Using the Loudness Meter

Presets

Use the Presets menu to select a metering preset.

  • ATSC A/85 LKFS
    • Target Loudness -24 LUFS
    • For broadcast
  • YouTube
    • -14 LUFS
    • For YouTube
Interface
  • Input: Indicates level of the audio signal that takes inter-sample peaks into account.
  • Short-Term: Uses a sliding time window of 3 seconds, describing a more averaged, less event-dependent loudness of the past 3 seconds.
  • Integrated: Averages the program from start to finish, describing the loudness of the whole program.
  • Momentary: Uses a sliding time window of 400 ms, best describes the instantaneous loudness
Measuring Loudness
  1. Play the project
  2. Watch the Integrated level to measure the entire program
  3. Watch the Short-Term level to get a 3 second average.

Additional Resources