Difference between revisions of "Audio Monitoring - Sound Effects Studio"
From Help Wiki
(→Speaker Levels) (Tag: VisualEditor) |
(→Headphone Levels) (Tag: VisualEditor) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Input Monitoring == | == Input Monitoring == | ||
* The '''MON''' button on inputs 1 and 2 sends the input signal directly to the outputs for low latency monitoring. | * The '''MON''' button on inputs 1 and 2 sends the input signal directly to the outputs for low latency monitoring. | ||
| − | * Use the '''Input | + | * Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback. |
* Turn all the way to the left for input only. | * Turn all the way to the left for input only. | ||
* Turn all the way to the right for playback only. | * Turn all the way to the right for playback only. | ||
== '''Speaker Levels''' == | == '''Speaker Levels''' == | ||
| − | + | The '''Monitor''' knob on the '''MOTU 4''' adjust the speaker levels. | |
| − | # Start with the | + | # Start with the '''Monitor''' level down |
| − | #* The | + | #* The big knob is turned all the way to the left |
| − | # | + | # Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback. |
| − | # Start playing sound in an application. | + | # Start playing sound in an application or get signal on a microphone. |
| − | # Slowly turn the | + | # Slowly turn the '''Monito'''r knob to the right to increase the volume. |
== '''Headphone Levels''' == | == '''Headphone Levels''' == | ||
| − | + | The '''MOTU M4''' headphone output is connected to a 4 channel headphone amp. | |
| − | + | * There is a small headphone volume knob above the headphone jack on the '''MOTU M4'''. | |
| − | There is a small headphone volume knob above the headphone jack on the '''MOTU | + | * Set the '''MOTU M4''' headphone knob to 2:00. |
| − | # Turn the | + | # Turn the '''Monitor''' level down. |
| − | #* The knob is turned all the way to the left | + | #* The big knob is turned all the way to the left |
| − | # | + | # Set the '''MOTU M4''' headphone knob to 2:00. |
| − | # | + | # Turn down the headphone levels on the 4 knobs on the headphone amp. |
| − | # Connect headphones to the headphone | + | # Connect headphones to the headphone amp. |
| − | # Slowly turn the headphone volume knob to the right to increase the volume | + | # Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback. |
| + | # Start playing sound in an application or get signal on a microphone. | ||
| + | # Slowly turn the headphone amp volume knob to the right to increase the volume. | ||
[[Category:Sound Effects Studio]] | [[Category:Sound Effects Studio]] | ||
Latest revision as of 14:27, 30 March 2023
Input Monitoring
- The MON button on inputs 1 and 2 sends the input signal directly to the outputs for low latency monitoring.
- Use the Input Monitor Mix knob to adjust the mix between the direct input signals and the output of the computer playback.
- Turn all the way to the left for input only.
- Turn all the way to the right for playback only.
Speaker Levels
The Monitor knob on the MOTU 4 adjust the speaker levels.
- Start with the Monitor level down
- The big knob is turned all the way to the left
- Use the Input Monitor Mix knob to adjust the mix between the direct input signals and the output of the computer playback.
- Start playing sound in an application or get signal on a microphone.
- Slowly turn the Monitor knob to the right to increase the volume.
Headphone Levels
The MOTU M4 headphone output is connected to a 4 channel headphone amp.
- There is a small headphone volume knob above the headphone jack on the MOTU M4.
- Set the MOTU M4 headphone knob to 2:00.
- Turn the Monitor level down.
- The big knob is turned all the way to the left
- Set the MOTU M4 headphone knob to 2:00.
- Turn down the headphone levels on the 4 knobs on the headphone amp.
- Connect headphones to the headphone amp.
- Use the Input Monitor Mix knob to adjust the mix between the direct input signals and the output of the computer playback.
- Start playing sound in an application or get signal on a microphone.
- Slowly turn the headphone amp volume knob to the right to increase the volume.
