Difference between revisions of "Recording with Pro Tools - Sound Effects Studio"
From Help Wiki
(→Setting Up Pro Tools) (Tag: VisualEditor) |
(→Setting Up Pro Tools) |
||
Line 38: | Line 38: | ||
# Turn off the “MON” button, disarm any tracks in the DAW, and adjust the big knob to hear your recording from the main speakers. | # Turn off the “MON” button, disarm any tracks in the DAW, and adjust the big knob to hear your recording from the main speakers. | ||
# Turn the “Input/Playback” knob fully to the playback side and disarm any tracks in the DAW to hear your recording from the headphones. | # Turn the “Input/Playback” knob fully to the playback side and disarm any tracks in the DAW to hear your recording from the headphones. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
# Remember to save your Session before closing the file, and preferably saving an additional copy of your session to a personal drive. | # Remember to save your Session before closing the file, and preferably saving an additional copy of your session to a personal drive. | ||
#Once everything is saved, shut everything down in reverse order from the power on procedure. | #Once everything is saved, shut everything down in reverse order from the power on procedure. |
Revision as of 15:56, 30 March 2023
Contents
Creating a Session in Pro Tools
- Open the Pro Tools application
- Select the Create tab.
- Select the Create from Template option and name your Session
- Select a template - SFX - Lab
- Name the session
- The template should automatically generate the sample-rate and bit-depth, but ensure it is set to Sample Rate: 48kHz and Bit Depth: 24.
- Click Create
- In the Save dialog click Desktop button on the left.
- Name the session.
- Click Save
Recording
Setting Up the MOTU M4
- Turn down the Monitor knob on the MOTU M4.
- Set up a microphone.
- Plug your microphone) into the front of the MOTU M4 Input 1
- Set the preamp levels with the Gain knob.
- Pay close attention to the meters on the face of the MOTU M4.
- Set the Gain knob so the meter is just turning yellow
- Press the MON button on your input channel.
- Set the Input Monitor Mix knob to 12:00.
- Set the MOTU M4 headphone knob to 2:00.
- Adjust the volumes knob on the headphone amp for each headphone that you are using.
- If the input meters look good but it’s still hard to hear, try turning up the headphone level on the headphone amp.
Setting Up Pro Tools
- Go to Options menu and make sure Low Latency Monitoring is selected.
- Press the Track Record Enable button on track 1 of Pro Tools.
- Record arm the tracks you will be recording sound to and press the main record button in the DAW.
- Check record levels and headphone levels
- Click the Record Enable button.
- Click the Play button to start recording.
- Click the Stop button when done
- Listen back to your recording.
- Turn off the “MON” button, disarm any tracks in the DAW, and adjust the big knob to hear your recording from the main speakers.
- Turn the “Input/Playback” knob fully to the playback side and disarm any tracks in the DAW to hear your recording from the headphones.
- Remember to save your Session before closing the file, and preferably saving an additional copy of your session to a personal drive.
- Once everything is saved, shut everything down in reverse order from the power on procedure.
- Clean up the space:
- Ensure all cables are coiled.
- Ensure all microphone stands are put away by loosening the joints and adjusting the pieces rather than forcing the pieces while the joints are still tightened.
- Place all microphones and clips back into their respective containers and note any missing or damaged gear.
- Tidy up any toys, noise makers, etc. Notate any issues in the logbook.