Difference between revisions of "02R-APOLLO-PROTOOLS Cheat Sheet"
From Help Wiki
(Created page with "== '''At a Glance''' == '''Directions for using the Yamaha 02R Console''': * Locate Scene memory > Press '''Display''' > Toggle to Scene '''95 or 96''' > Press '''Recall''' *...") |
(→At a Glance) (Tag: VisualEditor) |
||
| Line 5: | Line 5: | ||
*Studio: Patch in microphone to Panel A, Input 1 | *Studio: Patch in microphone to Panel A, Input 1 | ||
| − | (Mic panels in 1362 are normalized to the inputs of | + | (Mic panels in 1362 are normalized to the inputs of 02R MIC/LINE inputs) |
| − | * | + | *02R - find '''Layer''' section and select Layer 1-24 |
*Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.) | *Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.) | ||
*Push fader up and you should see levels on the Meters | *Push fader up and you should see levels on the Meters | ||
| Line 17: | Line 17: | ||
<br> | <br> | ||
'''Headphone Mixes''' | '''Headphone Mixes''' | ||
| − | *Use the '''Encoder''' knobs on the | + | *Use the '''Encoder''' knobs on the 02R to control headphone volume |
*In the '''Encoder Mode''' section select '''AUX''' | *In the '''Encoder Mode''' section select '''AUX''' | ||
**Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2 | **Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2 | ||
*Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones | *Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones | ||
| − | *Use the Encoder knob on channels | + | *Use the Encoder knob on channels 33 and 34 to control volume from Pro Tools Main L/R |
| + | |||
| + | [Category: Audio Lab] | ||
| + | |||
| + | [[File:02R cheat sheet 2024.pdf|left|thumb]] | ||
Revision as of 09:14, 2 July 2024
At a Glance
Directions for using the Yamaha 02R Console:
- Locate Scene memory > Press Display > Toggle to Scene 95 or 96 > Press Recall
- Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of 02R MIC/LINE inputs)
- 02R - find Layer section and select Layer 1-24
- Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.)
- Push fader up and you should see levels on the Meters
- Push up stereo fader (Main Mix fader)
- On the Control Room section, select STEREO
- Turn up Control Room Level light grey knob to control speaker volume
- Open Pro Tools and choose the API Stereo template; save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 33 and 34 are the MAIN L/R OUT of Pro Tools (Main Out L/R comes out of outputs 9/10 of the Apollo X16).
Headphone Mixes
- Use the Encoder knobs on the 02R to control headphone volume
- In the Encoder Mode section select AUX
- Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2
- Use the Encoder knob on your LIVE channel to control volume to the headphones
- Use the Encoder knob on channels 33 and 34 to control volume from Pro Tools Main L/R
[Category: Audio Lab]
