Difference between revisions of "Audio Interface in the Mix Bench"
From Help Wiki
(→Labeling) (Tag: VisualEditor) |
m (Krusea moved page Audio Interface - Mixing Bench to Audio Interface in the Mix Bench) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 18: | Line 18: | ||
== Outputs == | == Outputs == | ||
| − | * Outputs 1 and 2 are connected to the '''Mackie Big Knob | + | * Outputs 1 and 2 are connected to the '''Mackie Big Knob''' monitor controller. |
* The other outputs are not being used. | * The other outputs are not being used. | ||
| Line 26: | Line 26: | ||
* Read the [[Apollo x8 Interface]] article for additional information | * Read the [[Apollo x8 Interface]] article for additional information | ||
| − | [[Category:Audio | + | [[Category:Audio Mix Benches]] |
Latest revision as of 12:00, 21 September 2026
This lab has a Apollo x8 audio Interface which has multiple inputs and outputs.
Inputs
- On the front there are two HI-Z inputs inputs (labelled HI-Z 1 and HI-Z 2)
- Theses are for low level signal like electric guitars. Only use mono 1/4 cables.
- There are 4 XLR mic inputs on the back of the interface.
- There is a panel with 4 XLR jacks below the interface.
- These are connected to the 4 mic inputs.
- Microphones can be connected to these inputs using XLR cables (not included in the room).
- Each input has:
- Trim control knob for setting input levels
- Pad for reducing input levels
- 48V Phantom Power for powering condenser microphones
- Low cut filter.
- There are eight 1/4" line level inputs on the back.
- Theses are not connected to anything
Outputs
- Outputs 1 and 2 are connected to the Mackie Big Knob monitor controller.
- The other outputs are not being used.
Labeling
- The various audio applications may refer to the inputs and outputs with slightly different names.
- We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.
- Read the Apollo x8 Interface article for additional information
