Difference between revisions of "Library 1540"

From Help Wiki
(Created page with " Category:Media Classrooms ===Computer (built-in)=== Turn on the projector and select “PC” on the podium. If you are using the built-in MacMini, make sure the podium ...")
 
(changed over to new template formatting with sidebar, etc.)
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
__NOTOC__
 +
{{TwoColumn
 +
|lead=
 +
'''LIB 1540''' is located near the drinking fountains and media rooms in the B wing of the library building.
 +
|content=
 +
{{AVclassroom_template_podium226}}
 +
{{AVclassroom_template_ALS-plug}}
  
  
 +
|sidebar=
 +
{{GetAVHelp}}
 +
}}
 
[[Category:Media Classrooms]]
 
[[Category:Media Classrooms]]
−
===Computer (built-in)===
 
−
Turn on the projector and select “PC” on the podium. If you are using the built-in MacMini, make sure the podium “Computer” switch is set to “Built-in”. The computer should be on, so just move the mouse or press any key on the keyboard to wake it up. You must authenticate with your TESC login to use the computer, and it may take a few extra moments to start up the first time you log in. If you don’t have a TESC login, call Electronic Media at x6270 for access. Always log out when you are done with the computer.   
 
−
 
−
===Computer (laptop)===
 
−
Turn on the projector and select “PC” on the podium. If you are using your own laptop, make sure the podium “Computer” switch is set to “Portable”. Connect the VGA cable coming out of the podium to your computer, and if you will need to hear computer audio, plug the small audio plug into your headphone jack. An ethernet cable is also provided for internet access.
 
−
For best results, wait until everything is connected before turning on your laptop, and it should automatically appear on the large screen.
 
−
 
−
===Document Camera===
 
−
Turn on the projector and select “Doc Cam” on the podium. Unfold the arms and lens of the document camera, taking care not to force them. Press the button on the document camera labeled “On/Off”. Place your document on the white surface. To temporarily freeze the image on the screen, press “Pause”, then press again to unfreeze.
 
−
 
−
===DVD or CD===
 
−
The DVD player is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVD” on the podium, put your disc in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate.
 
−
 
−
===VHS tape or TV===
 
−
The VCR is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “VCR” on the podium, put your tape in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to control playback or change channels.
 
−
 
−
===DV tape===
 
−
The DV deck is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVCAM” on the podium, put your tape in the player, and use the remote control (in the equipment rack drawer) to control playback.
 

Latest revision as of 15:32, 6 January 2020


LIB 1540 is located near the drinking fountains and media rooms in the B wing of the library building.


LIBPANEL.pdf

Source buttons shown here may be in a different order in the classroom.

Starting

  1. To turn ON the projector, press the display "ON" button.
The button will blink for 30 seconds while the projector warms up.
  1. You may need to hold the button for 2 seconds.
  2. On the AV Control Panel, press the button for your source. A solid light indicates which source is active.

HDMI Laptop

  1. Press the HDMI button on the AV Control Panel
  2. Plug in your laptop to the provided HDMI cable
  3. Sound comes through the HDMI connection; when playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

VGA Laptop

  1. Press the VGA button on the AV Control Panel
  2. Plug in your laptop to the provided VGA cable
  3. Sound comes through the earphone plug on the VGA cable. Connect it to your earphone port on the laptop & make sure the device volume is up. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

Mac Mini

  1. Press the Mac Mini button on the AV Control Panel
  2. Log in using the keyboard and mouse (if the keyboard and mouse are not on the podium top, check the keyboard tray)
  3. Sound level should be turned up on the mac, and the volume adjusted via the AV Control Panel volume knob. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.
Important: If there is a "Audio" switch on the right, near the laptop wires, make sure it is set to "Normal" (not "mixer")

VHS

  1. The VHS player is in the equipment rack (which must be unlocked with a key)
  2. Press the VHS button on the AV Control Panel
  3. Turn on the VCR and put your VHS tape in the player.
  4. Use the AV Control Panel buttons to operate the VCR, or the buttons on the VCR itself. A remote is also in the rack drawer, if one is available.
  5. Closed Caption for the VCR is turned on and off by the "Close Caption" switch near the laptop wires.

Blu-ray / DVD

  1. Updated rooms that contain a Blu-ray player have the player in the front of the the podium below the keyboard tray. (very near the top)
  2. Rooms with only DVD players have the DVD player in the equipment rack (which must be unlocked with a key)
  3. Press the BLU-RAY button or DVD button on the AV Control Panel
  4. Press the eject button on the player and put your disc in the player.
  5. Use the AV Control Panel buttons to operate the player, or use the player's remote control (in the keyboard tray,on top of the podium, or in the rack drawer).
  6. Closed Caption can be turned on/off from the "subtitles" button on the remote, or from the menu system of your video disc.

Document Camera

  1. Press "Doc Cam" on the AV Control Panel
  2. Turn on the document camera either by tapping the power button (new ones), or turning on the switch (old ones).
  3. Adjust the camera arm and head to show your document or demonstration the way you want it on the screen.
  4. New cameras with the folding arm have a switch on the front of the camera head that sets the camera light to off/low/high light
  5. Flatbed-type cameras have a button on the control panel to select the light mode.
  6. Important: To turn off new Epson cameras, pressing the power button twice: the first asks for a confirmation & pressing again will turn it off.

Troubleshooting:

No picture?:

- Try pressing 'Mute All' and then pressing again to unmute
- Is data projector turned on? (try starting again, & call x6270)
- Is the cable firmly connected to the laptop (or adapter, and adapter to laptop)

No audio?:

- Is volume on AV control panel turned up enough to hear?
- Laptop: Is the volume on the laptop turned up and source selected? (HDMI button for HDMI connection, etc?)
- Is the Yamaha (or other brand) receiver turned on in the rack?


Assistive Listening Procedures

This room does not have integrated listening technology installed, but there is a microphone input jack and XLR or phono plug outputs on the panel.
These can be used to connect an extra microphone and listening equipment, or self-contained listening equipment can be used.
Please work with [Access Services] to coordinate an extended checkout of suitable listening equipment from Media Loan.


Get Help

7:30 to 4:30 weekdays
Classroom Support is dispatched.
After 4:30 & on weekends
Calls are made into help tickets. Expect a follow-up the weekday after we receive the ticket.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Library_1540&oldid=39533"

The Evergreen State College