Difference between revisions of "Recording with Premiere Pro - Sound Effects Studio"
From Help Wiki
(Created page with " Category:Sound Effects Studio") |
(Tag: VisualEditor) |
||
Line 1: | Line 1: | ||
+ | == Creating a Session in Audition[edit | edit source] == | ||
+ | # Open the '''Audition''' application and sign in with your Evergreen email address and password. | ||
+ | # Select '''File''' > '''New''' > '''Multitrack Session''' from the toolbar. | ||
+ | # Set the following settings: | ||
+ | ## '''Session Name''': use a meaningful name. | ||
+ | ## '''Folder Location''': Click '''Browse''' and select a folder on your Desktop. | ||
+ | ## '''Template''' : None | ||
+ | ## '''Sample Rate''': 48000 | ||
+ | ## '''Bit Depth''' : 24 | ||
+ | ## '''Master''': Stereo | ||
+ | ## Click '''OK''' | ||
+ | == Importing a Video File[edit | edit source] == | ||
+ | # Select '''Multitrack > Tracks > Add Video Track''' from the toolbar. | ||
+ | # Make sure that your video file has been moved to the folder with for the Audition session. | ||
+ | # Drag the video file to the beginning of the Video Reference track. | ||
+ | #* You can mute or delete the audio if it is not needed. | ||
+ | # If there was audio i the video it will be imported to track 1. | ||
+ | # In top right of Audition click the '''Video on Second Display''' window set button. | ||
+ | #* The Video window will show up on the second display and also on the performer display. | ||
+ | == Recording[edit | edit source] == | ||
+ | |||
+ | === Setting Up the MOTU M4[edit | edit source] === | ||
+ | # Turn down the '''Monitor''' knob on the '''MOTU M4'''. | ||
+ | # Set up a microphone. | ||
+ | # Plug your microphone) into the front of the '''MOTU M4''' '''Input 1''' | ||
+ | # Set the preamp levels with the '''Gain''' knob. | ||
+ | # Pay close attention to the meters on the face of the MOTU M4. | ||
+ | # Set the '''Gain''' knob so the meter is just turning yellow | ||
+ | # Press the '''MON''' button on your input channel. | ||
+ | # Set the '''Input Monitor Mix''' knob to 12:00. | ||
+ | # Set the '''MOTU M4''' headphone knob to 2:00. | ||
+ | # Adjust the volumes knob on the headphone amp for each headphone that you are using. | ||
+ | #* If the input meters look good but it’s still hard to hear, try turning up the headphone level on the headphone amp. | ||
+ | |||
+ | === Recording the First Track[edit | edit source] === | ||
+ | # Set the input of track 1 to '''Mono: M4 In 1''' | ||
+ | # Click the '''Track Record Enable''' button on track 1. | ||
+ | # Check record levels and headphone levels. | ||
+ | # Click the '''Record''' button in the '''Transport''' bar. | ||
+ | # Click the '''Stop''' button when done | ||
+ | # Click the '''Track Record Enable''' button on track 1 to unarm the track. | ||
+ | # Click '''Play''' to playback the recording. | ||
+ | #* Turn the '''Input Monitor Mix''' all the way to the right to only hear playback | ||
+ | #* Turn up the '''Monitor''' knob to listen on the speakers. | ||
+ | |||
+ | === Recording a Second Track While Monitoring Track 1[edit | edit source] === | ||
+ | # Set the input of track 2 to '''Mono: M4 In 1''' | ||
+ | # Click the '''Track Record Enable''' button on track 2. | ||
+ | # Check record levels and headphone levels. | ||
+ | # Click the '''Play''' button to and adjust '''Input Monitor Mix''' to change the balance of the microphone and the Pro Tool playback. | ||
+ | # Cue Audition to where you want it to start. | ||
+ | # Click the '''Record''' button. | ||
+ | # Click the '''Stop''' button when done | ||
+ | # Click the '''Track Record Enable''' button on track 2 to unarm the track. | ||
+ | # Click '''Play''' to playback the recording. | ||
+ | #* Turn the '''Input Monitor Mix''' all the way to the right to only hear playback | ||
+ | #* Turn up the '''Monitor''' knob to listen on the speakers. | ||
+ | |||
+ | |||
+ | == End of Session[edit | edit source] == | ||
+ | # Remember to save your Session before closing the file. | ||
+ | # Back ups the entire folder to an external drive or OneDrive. | ||
+ | # Quit Pro Tools. | ||
+ | # Turn all monitor knob down. | ||
+ | # Shutdown the computer. | ||
+ | # Clean up the space: | ||
+ | ## Ensure all cables are coiled. | ||
+ | ## Ensure all microphone stands are put away by loosening the joints and adjusting the pieces rather than forcing the pieces while the joints are still tightened. | ||
+ | # Tidy up any toys, noise makers, etc. Notate any issues in the logbook. | ||
[[Category:Sound Effects Studio]] | [[Category:Sound Effects Studio]] |
Revision as of 16:05, 21 April 2023
Contents
Creating a Session in Audition[edit | edit source]
- Open the Audition application and sign in with your Evergreen email address and password.
- Select File > New > Multitrack Session from the toolbar.
- Set the following settings:
- Session Name: use a meaningful name.
- Folder Location: Click Browse and select a folder on your Desktop.
- Template : None
- Sample Rate: 48000
- Bit Depth : 24
- Master: Stereo
- Click OK
Importing a Video File[edit | edit source]
- Select Multitrack > Tracks > Add Video Track from the toolbar.
- Make sure that your video file has been moved to the folder with for the Audition session.
- Drag the video file to the beginning of the Video Reference track.
- You can mute or delete the audio if it is not needed.
- If there was audio i the video it will be imported to track 1.
- In top right of Audition click the Video on Second Display window set button.
- The Video window will show up on the second display and also on the performer display.
Recording[edit | edit source]
Setting Up the MOTU M4[edit | edit source]
- Turn down the Monitor knob on the MOTU M4.
- Set up a microphone.
- Plug your microphone) into the front of the MOTU M4 Input 1
- Set the preamp levels with the Gain knob.
- Pay close attention to the meters on the face of the MOTU M4.
- Set the Gain knob so the meter is just turning yellow
- Press the MON button on your input channel.
- Set the Input Monitor Mix knob to 12:00.
- Set the MOTU M4 headphone knob to 2:00.
- Adjust the volumes knob on the headphone amp for each headphone that you are using.
- If the input meters look good but it’s still hard to hear, try turning up the headphone level on the headphone amp.
Recording the First Track[edit | edit source]
- Set the input of track 1 to Mono: M4 In 1
- Click the Track Record Enable button on track 1.
- Check record levels and headphone levels.
- Click the Record button in the Transport bar.
- Click the Stop button when done
- Click the Track Record Enable button on track 1 to unarm the track.
- Click Play to playback the recording.
- Turn the Input Monitor Mix all the way to the right to only hear playback
- Turn up the Monitor knob to listen on the speakers.
Recording a Second Track While Monitoring Track 1[edit | edit source]
- Set the input of track 2 to Mono: M4 In 1
- Click the Track Record Enable button on track 2.
- Check record levels and headphone levels.
- Click the Play button to and adjust Input Monitor Mix to change the balance of the microphone and the Pro Tool playback.
- Cue Audition to where you want it to start.
- Click the Record button.
- Click the Stop button when done
- Click the Track Record Enable button on track 2 to unarm the track.
- Click Play to playback the recording.
- Turn the Input Monitor Mix all the way to the right to only hear playback
- Turn up the Monitor knob to listen on the speakers.
End of Session[edit | edit source]
- Remember to save your Session before closing the file.
- Back ups the entire folder to an external drive or OneDrive.
- Quit Pro Tools.
- Turn all monitor knob down.
- Shutdown the computer.
- Clean up the space:
- Ensure all cables are coiled.
- Ensure all microphone stands are put away by loosening the joints and adjusting the pieces rather than forcing the pieces while the joints are still tightened.
- Tidy up any toys, noise makers, etc. Notate any issues in the logbook.