Sem II 4107 Class Lab

Powering The System

1. Press Display Power button on the Media Control Panel to turn on the television.
   • A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
2. Press the input button on the Media Control Panel. This will allow you to select a source.
3. An Input Source menu will appear on the top right corner of the screen. Use the Input button to scroll through the menu to select your source.
4. For VHS/DVD select 2AV.
5. For Laptops select 3RGB.

If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.

VHS/DVD

1. Turn on the VHS/DVD deck.
2. Use the Remote or the buttons on the VHS/DVD deck to control viewing functions, or access menus.

Laptop

No permanent VGA cable in this room. You can checkout a VGA cable from Media Loan X 6253.

1. Connect the VGA cable to your Laptop
   • If you have a Mac you will need a mac adapter to connect to VGA cable. Adapter available from Media Loan X 6253.
2. If you need audio connect the Stereo Mini cable to the headphone jack on your laptop.
3. Turn on the laptop.
4. The laptop should now be projecting on the television monitor.