3D Lab Checklist
From Help Wiki
Revision as of 09:20, 5 October 2016 by Burchr27 (Talk | contribs) (Created page with "===Checklist=== Follow this checklist every time you use the lab. Look at the 3D Lab Manual article for det...")
Checklist
Follow this checklist every time you use the lab. Look at the [3D Lab Manual] article for details on the steps below 1. Sign the log book 2. Get materials ready 3. Power on camera and lights. Make sure that the camera is set to Manual (M). 4. Power on the computer 5. Open Dragonframe. Make a new project or open an existing one. 6. Set Aspect Ratio masks 7. Set camera settings with Dragonframe o Focus the lens o Set exposure 8. Turn off overhead lights and check for reflections. 9. Animate 10. Export
