O2R-MOTU-Digital Performer Cheat Sheet
From Help Wiki
At a Glance
Directions for using the Yamaha 02R Console:
- Locate Scene memory > Press Display > Toggle to Scene 95 or 96 > Press Recall
- Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
- O2R - find Layer section and select Layer 1-24
- Trim out microphone, and use +48V On/Off switch as needed (for condenser microphones, etc.)
- Push fader up and you should see levels on the Meters
- Push up stereo fader
- On the Control Room section select STEREO
- Turn up Control Room Level light grey knob to control speaker volume
- Open Digital Performer and choose Audio Lab Template, save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
Headphone Mixes
- Use the Encoder knobs on the O2R to control headphone volume
- In the Encoder Mode section select AUX
- Use the Encoder knob on your LIVE channel to control volume to the headphones
- Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
