Start Up Procedure/Proficiency - COM 118

Log into the logbook
Explain the simple room flow
Explain the norms from the NEVE to the Apollos
Turn ON Power Bar at the bottom of the rack (to the right of the Neve)
Apollo A should then Power ON. If not, Power ON Apollo A Interface (wait to load: HOST, INT, 48)
Power ON Apollo B interface (wait to load: HOST, EXT, 48)
Use the LG Display Remote to turn on Display monitors
Turn ON and login to the computer
OPTIONAL: Make a new folder with your name on it in the Storage drive

- (Storage drive folders are accessible to all users of the computer; anyone can modify or delete files here, but it is a good way to turn in assignments or share files with classmates).

Go through the signal flow of an input channel
Explain when you would put the channel in TAPE
Patch a line-level source into an input channel of the NEVE
Listen to that source via the Stereo Bus
Explain the channel Cue function and master Cue section of the NEVE
Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume
Open Digital Performer
Select - New - 118 Multitrack Template
Record the source that's on the NEVE
Listen to the outputs of Digital Performer (Can listen from "Apollo Monitor" source, or can send Ch. 21/22 to Stereo Bus)
Explain the Cue function in DP and where the Cue sends go on the NEVE
Monitor and adjust the Cue send level in DP and on the NEVE