02R-APOLLO-PROTOOLS Cheat Sheet

At a Glance

Directions for using the Yamaha 02R Console:

• Locate Scene memory > Press Display > Toggle to Scene 95 or 96 > Press Recall
  • Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.

• Studio: Patch in microphone to Panel A, Input 1

(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)

• O2R - find Layer section and select Layer 1-24
• Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.)
• Push fader up and you should see levels on the Meters
• Push up stereo fader (Main Mix fader)
• On the Control Room section, select STEREO
• Turn up Control Room Level light grey knob to control speaker volume
• Open Pro Tools and choose the API Stereo template; save to Storage drive in your folder with your name on it.
• On Layer 25-48 of the O2R, channels 33 and 34 are the MAIN L/R OUT of Pro Tools (Main Out L/R comes out of outputs 9/10 of the Apollo X16).

Headphone Mixes

• Use the Encoder knobs on the O2R to control headphone volume
• In the Encoder Mode section select AUX
  • Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2
• Use the Encoder knob on your LIVE channel to control volume to the headphones
• Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R