GoPro Hero 4 Gear Guide
The GoPro HERO4 is a small video camera that delivers super slow motion at 240 frames per second, high-resolution 4K30 and 2.7K60 video combines with 1080p120 and 720p240 slow motion to enable stunning, immersive footage. Protun settings for both photos and video unlock manual control of Color, ISO Limit, Exposure and more. Waterproof to 131 feet (40 meter) with 12MP photos at 30 frames per second and improved audio.
The GoPro Hero 4 is an extremely durable camera, however there are precautions you need to take: - Keep the plastic camera housing on the camera during all filming. - Make sure the rubber lining of the housing is completely clean before exposing the camera to water. - Make sure the locking bolt is always secured tightly. - Do not turn on the camera if it is wet. - Do not expose the battery to rain or snow. - Do not drop this camera from considerable heights or hit it with a heavy object.
Cleaning the housing: Rinse in fresh water and shake dry or let air dry. Do not dry with a cloth, lint to compromise the seal. If the seal is broken, water may leak through and permanently damage the camera. Re-install the seal into the grooves in the backdoor of the camera housing.
Touch Display: Located on the back of the camera, the touch display lets you control the cameras settings and playback your photos/videos. It also functions as a viewfinder.
Swipe left for Modes Swipe up from bottom for Menu/Settings Swipe up/down to move through Settings Tap to select an item Swipe down from top edge to close the setting menu Swipe right to display the last captured video or photo Swipe left/right to display gallery images or playback mode Double tap to change Field of Vision in preview mode Press on display for two seconds to lock the touch display. This is useful if you are capturing handheld footage.
The GoPro Hero 4 can shoot video, photo, and timelapse footage. Our kit includes a durable plastic housing, a monopod, a head-mount, and a locking bolt. The camera is equipped with a Micro USB 32GB memory card.
It has multiple modes:
-Playback -Video -Photo -Multi-shot -Set up
To Power On: Press the Power/Mode button once, located on the front of the camera, next to the lens. A red light will occur three times and the sound indicator will emit three beeps. When the camera status displays information, the camera is on.
To Power Down: press and hold Power/Mode button for two seconds.
Access playback mode by swiping left on the screen and selecting playback, OR pressing the Mode/Power button and selecting playback with the Shutter/Select button.
You can select videos to watch by simply tapping them, OR using the Mode/Power button to cycle through the clips, selecting them with the Shutter/Select button.
When you have selected a video to watch you will see four icons on the bottom of the screen. -The Delete icon will delete the selected video -The Play/ Pause icon will pause the video, giving you the option to choose which frame to stop on. -The Scissors icon allows you to create a short clip from your video. This does not affect the original footage. The clip will be saved as a new file.
To exit Playback mode, tap the X in the top right hand corner.
Swipe left on the screen and select Video Mode. To Capture video simply press the Shutter/ Select Button. If you need to select one of the different capturing modes, swipe up to go into Settings and select Mode.
Video Mode contains 4 different Capturing Modes: Time Lapse mode creates video from frames captured at specific intervals. It is available only in 4K and 2.7K 4:3 resolutions and is captured without audio. Photo+Video will capture a photo at selected intervals while you record video. Looping lets you continuously record but only save select moments. Available intervals for Looping are 5, 20, 60 and 120 minutes. Only the most recent interval (ex: 5 minutes) is saved when you stop recording. If you record for an interval and do not press the Shutter/Select button to stop recording and save, the camera begins a new interval by recording over your previous footage. If you select Max Video as the interval, the camera records until the memory card is full, then overwrites the content. Monitor your footage carefully in looping mode!
Intervals Only apply to Time Lapse and Video, Video + Photo, and Looping. Interval determines the amount of time that passes between each captured frame.
Resolutions To change the resolution, swipe up to open the Settings and select Resolution.
Resolution correlates to the amount of pixels and frame rate of your footage. There are a few factors that will go into deciding which resolution you would like to film at (e.g. how much space is available on your memory card, what you will be filming.)This camera is capable of filming at nine different resolutions- each one has its own practical usage.Make sure to pick a resolution that fits the aspect ratio of your tv or computer. Keep in mind that the higher the resolution, the more room it will take up on your memory card. (FOV- Field of Vision) 4K: Ultra Wide FOV. Recommended for tripod mounted/ still video. Performs well even in low light. 2.7K: Ultra Wide & Medium FOV. Recommended for cinematic shots. 1440p: Ultra Wide. Recommended for body-mounted shots, and high action shots because of the high frame rate and very large field of view. 1080p: Ultra Wide, Medium, and Narrow (reduced distortion) FOV. Versatile and good for everything. 1080p SuperView: Extremely Wide FOV. Recommended for body-or gear-mounted shots. Vertical 4:3 content is automatically stretched to full-screen 16:9 for widescreen playback. 1920x1080 960p: Ultra Wide FOV. Use for slow motion shots on a body-mount. 720p: Ultra Wide FOV. Use for slow motion shots while hand-held. 720p Superview: Extremely wide FOV. Recommended for body-or gear-mounted shots. Vertical 4:3 content is automatically stretched to full-screen 16:9 for widescreen playback. Lower resolution than 1080p Superview. WVGA: Ultra Wide FOV. Standard definition, 840x480. Good for slow motion when very high resolution is not desired or necessary. Make sure to pick a resolution that fits the aspect ratio of your tv or computer.
Swipe left to display the camera modes, and then tap the Photo mode icon. To take a photo press the shutter button. Swipe up to open the settings menu. Capture Modes: Single, Continuous and Night. Single mode will take a single photo adjusted to the manual settings. Continuous Shooting will take pictures as long as the shutter button is pressed down. Night mode will allow you to manually adjust the shutter speed to get a properly exposed image.
The batteries are located on the bottom side of the camera,
CHARGING: insert the battery into the go pro, close the bottom door and charge by connecting the camera to a computer or other USB charging adapter using the included USB cable, the camera status light will turn on during charging and turn off when charging is complete. When charging with a computer be sure the computer is connected to a power source DONOT ATTEMPT TO CHARGE WITH A CABLE NOT INCLUDED IN KIT, CAN RESULT IN FIRE AND/OR EQUIPMENT DAMAGE