Difference between revisions of "Diode Array 2"

From Help Wiki
 
(One intermediate revision by the same user not shown)
Line 13: Line 13:
 
<br/>
 
<br/>
 
----
 
----
====== Notes ======
+
===== Notes =====
* The software used to configure the instrument is called: VISA Assistant.
+
* The software used to configure the instrument is called: Agilent IO Configuration.
* UV-Visible ChemStation when opened will prompt for login credentials, just click OK, no need to provide UN & PW.
+
* UV-Visible ChemStation when opened will prompt for login credentials, use "science" for the UserName & no PW (or blank password).
 
* To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite.
 
* To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite.
 
* When not in use, the instrument should be turned off to preserve the bulb life.
 
* When not in use, the instrument should be turned off to preserve the bulb life.
* Diode Arrays require an HP 10833B PCI card to connect PC to instrument. The Gateway E-3500 PC's have the compatible PCI slots on the systemboard; retain all Gateway E-3500's for this purpose.
+
* Diode Arrays require an Agilent 82350 PCI card to connect PC to instrument.
* Gateway E-3500, to enter BIOS requires pressing F1 during POST.
+
** [[FILE:Agilent_82350-GPIB_PCI_Card_Front.png | 150x150px]]
 
<br/>
 
<br/>
 
<br/>
 
<br/>

Latest revision as of 12:35, 8 May 2018

Diode Array 2

UV-Visible Spectrophotometer Wikipedia entry

Manuals

Information Table


Notes
  • The software used to configure the instrument is called: Agilent IO Configuration.
  • UV-Visible ChemStation when opened will prompt for login credentials, use "science" for the UserName & no PW (or blank password).
  • To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite.
  • When not in use, the instrument should be turned off to preserve the bulb life.
  • Diode Arrays require an Agilent 82350 PCI card to connect PC to instrument.
    • Agilent 82350-GPIB PCI Card Front.png




back to Main page