Difference between revisions of "5.1 Surround - COM 118"

From Help Wiki
(Created page with "118 Surround Sound 5.1 Setup -Check bundles for correct 5.1 channel placement Speakers - L R C LFE LS RS Apollo Outs - 33 34 35 36 37 38 -Assign...")
 
m (→‎118 Surround Sound 5.1 Setup)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
118 Surround Sound 5.1 Setup
+
== '''118 Surround Sound 5.1 Setup''' ==
 +
*Check Pro Tools' bundles for correct 5.1 channel placement:
 +
**Speakers -      L    R    C  LFE  LS  RS  should be assigned to Apollo Outs - 17  18  19  20    21  22
  
−
-Check bundles for correct 5.1 channel placement
+
*Assign outputs of tracks and master to 5.1 output
−
Speakers -      L    R    C  LFE  LS  RS
+
−
Apollo Outs - 33  34  35  36    37  38
+
−
-Assign outputs of tracks and master to 5.1 output
+
  
−
-PATCH:
+
*'''PATCH:'''
−
-NEVE GROUP OUTPUTS (1-6) N17-22 →
+
**NEVE GROUP OUTPUTS (1-6) (located at patch points) N17-22) to 118 SPL VOL. CTRL. INPUTS (L,R,C,LFE,LS,RS) (located at patch points V19-24)
−
118 SPL VOL. CTRL. INPUTS (L,R,C,LFE,LS,RS)V19-24
+
**SPL VOL. CNTRL OUTPUTS (L, R) (located at patch points U25,26) must be patched to118 C/R SPEAKER INPUTS (L,R) (located at patch points V 25, 26)
−
-118 SPL VOL. CNTRL OUTPUTS (L, R) U25,26→
+
−
118 C/R SPEAKER INPUTS (L,R)   V 26,26  
+
  
−
-On the Neve, assign channels 17-22 to groups 1-6 in corresponding order. (ie 17 -> 1, 18 -> 2, etc.). These will be your 6 surround output channels.
+
*On the Neve, assign channels 17-22 to groups 1-6 in corresponding order. (ie Channel 17 to Group 1, Channel 18 to Gropu 2, etc)  
−
*Make sure ‘tape’ button is pressed in on these channels!!
+
**These will be your 6 surround output channels.
 +
*Make sure ‘tape’ button is pressed in on these channels
  
−
-Make sure all buttons are pushed in on the 5. on the SPL Surround Monitor Controller.  Also make sure all other buttons are not pushed in.
+
*Make sure all buttons that turn each 5.1 speaker on or off on the SPL Surround Monitor Controller are turned on.   
−
*This controller will be your main Volume  
+
*Also make sure all other buttons are not pushed in.
−
  Control!!
+
**This controller will be your main Volume Control!!
−
 
+
−
-Bring up your levels in your project, the faders on ch. 17-22, and faders on groups 1-6.
+
  
 +
*Bring up your levels in your project, the faders on Channels 17 through 22, and faders on Groiups 1 through 6.
  
 
[[Category:COM 118]]
 
[[Category:COM 118]]

Latest revision as of 11:21, 13 March 2026

118 Surround Sound 5.1 Setup

  • Check Pro Tools' bundles for correct 5.1 channel placement:
    • Speakers - L R C LFE LS RS should be assigned to Apollo Outs - 17 18 19 20 21 22
  • Assign outputs of tracks and master to 5.1 output
  • PATCH:
    • NEVE GROUP OUTPUTS (1-6) (located at patch points) N17-22) to 118 SPL VOL. CTRL. INPUTS (L,R,C,LFE,LS,RS) (located at patch points V19-24)
    • SPL VOL. CNTRL OUTPUTS (L, R) (located at patch points U25,26) must be patched to118 C/R SPEAKER INPUTS (L,R) (located at patch points V 25, 26)
  • On the Neve, assign channels 17-22 to groups 1-6 in corresponding order. (ie Channel 17 to Group 1, Channel 18 to Gropu 2, etc)
    • These will be your 6 surround output channels.
  • Make sure ‘tape’ button is pressed in on these channels
  • Make sure all buttons that turn each 5.1 speaker on or off on the SPL Surround Monitor Controller are turned on.
  • Also make sure all other buttons are not pushed in.
    • This controller will be your main Volume Control!!
  • Bring up your levels in your project, the faders on Channels 17 through 22, and faders on Groiups 1 through 6.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=5.1_Surround_-_COM_118&oldid=47993"

The Evergreen State College