Difference between revisions of "Diode Array 1"
From Help Wiki
| Line 13: | Line 13: | ||
<br/> | <br/> | ||
---- | ---- | ||
| − | + | ===== Notes ===== | |
| − | * The software used to configure the instrument is called: | + | * The software used to configure the instrument is called: Agilent IO Configuration. |
| − | * UV-Visible ChemStation when opened will prompt for login credentials, | + | * UV-Visible ChemStation when opened will prompt for login credentials, use "science" for the UserName & no PW (or blank password). |
* To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite. | * To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite. | ||
* When not in use, the instrument should be turned off to preserve the bulb life. | * When not in use, the instrument should be turned off to preserve the bulb life. | ||
| − | * Diode Arrays require an HP 10833B PCI card to connect PC to instrument | + | * Diode Arrays require an HP 10833B PCI card to connect PC to instrument. |
| − | + | ||
<br/> | <br/> | ||
<br/> | <br/> | ||
Revision as of 09:00, 8 May 2018
UV-Visible Spectrophotometer Wikipedia entry
Manuals
Information Table
Notes
- The software used to configure the instrument is called: Agilent IO Configuration.
- UV-Visible ChemStation when opened will prompt for login credentials, use "science" for the UserName & no PW (or blank password).
- To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite.
- When not in use, the instrument should be turned off to preserve the bulb life.
- Diode Arrays require an HP 10833B PCI card to connect PC to instrument.
