Difference between revisions of "Diode Array 5"
From Help Wiki
| Line 13: | Line 13: | ||
<br/> | <br/> | ||
---- | ---- | ||
| − | + | ===== Notes ===== | |
| − | * The software used to configure the instrument is called: | + | * The software used to configure the instrument is called: Agilent IO Configuration. |
* UV-Visible ChemStation when opened will prompt for login credentials, just click OK, no need to provide UN & PW. | * UV-Visible ChemStation when opened will prompt for login credentials, just click OK, no need to provide UN & PW. | ||
* To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite. | * To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite. | ||
* When not in use, the instrument should be turned off to preserve the bulb life. | * When not in use, the instrument should be turned off to preserve the bulb life. | ||
| − | |||
* Gateway E-3500, to enter BIOS requires pressing F1 during POST. | * Gateway E-3500, to enter BIOS requires pressing F1 during POST. | ||
| + | * Diode Arrays require an Agilent 82350 PCI card to connect PC to instrument. | ||
| + | ** [[FILE:Agilent_82350-GPIB_PCI_Card_Front.png | 150x150px]] | ||
<br/> | <br/> | ||
<br/> | <br/> | ||
Revision as of 12:38, 8 May 2018
UV-Visible Spectrophotometer Wikipedia entry
Manuals
Information Table
Notes
- The software used to configure the instrument is called: Agilent IO Configuration.
- UV-Visible ChemStation when opened will prompt for login credentials, just click OK, no need to provide UN & PW.
- To perform a connectivity test between the PC and instrument use the "Instrument 1 -online" in the UV-Visible ChemStation software suite.
- When not in use, the instrument should be turned off to preserve the bulb life.
- Gateway E-3500, to enter BIOS requires pressing F1 during POST.
- Diode Arrays require an Agilent 82350 PCI card to connect PC to instrument.
-
