Difference between revisions of "2D Lab Manual"

From Help Wiki
(→‎Camera)
(→‎Computer)
 
(96 intermediate revisions by 7 users not shown)
Line 1: Line 1:
 +
 
==Intro==
 
==Intro==
 
There are two 2D Animation Labs.   
 
There are two 2D Animation Labs.   
 +
* Both have the main animation stands set up identically. 
 +
* The Library 2D Rotoscope Lab (L1408) has and additional rotoscoping set-up. 
 +
* The Com 2D Multi-Use Lab (Com 309) has a second messy stand.
 +
[[File:LogBook.jpg|thumb|right|alt=Alt text|The Log Book]]
 +
 
===Log Book===
 
===Log Book===
 
* Every time you enter the lab please sign in and record the following information:
 
* Every time you enter the lab please sign in and record the following information:
Line 7: Line 13:
 
** Equipment used (compound table, paper punch, computer, sand stand, rotoscope table)
 
** Equipment used (compound table, paper punch, computer, sand stand, rotoscope table)
 
** Record any technical problems (so we can fix it)
 
** Record any technical problems (so we can fix it)
−
** Status of the lab: clean, messy, anything missing or broken?
+
** Status of the lab: clean, messy, is anything missing or broken?
−
* This is the main form of communication between you and the staff who maintains and audits the space weekly. Failure to sign in to the Log Book will result in a loss of access privileges.
+
* This is the main form of communication between you and the animation staff who maintain and audit the space every week. Failure to sign in to the Log Book will result in a loss of access privileges.
  
−
* If there is an immediate issue please contact us via email at [http://www.evergreen.edu/scripts/contact.php?sm=animation&sub=Email%20from%20Animation%20Site&title=Contact%20Animation%20Staff animation@evergreen.edu]
+
* If there is an immediate issue, please contact the Multimedia Lab at 360-867-5455 or email animationsupport@evergreen.edu
  
 
===Scheduling===
 
===Scheduling===
−
* You must always have time reserved when using the labs.
+
Read the following articles
−
* Regular scheduling should be done through Media Loan along with key checkout.
+
 
−
* It is your responsibility to confirm your reservation time, day and that you are in the correct room by asking for a receipt.
+
[[Media Labs Access Policy]]
−
* If you need a substantial amount of time contact animation staff for scheduling.
+
 
−
* You may lose your scheduled time if you are more than 15 minutes late, and whenever possible please cancel any time that you will not use.
+
[[Scheduling General Access Media Labs]]
 +
* You must always have time reserved when using the labs.  Only use your scheduled time.
 +
* Students can only be in the labs during open building hours.
 +
* The labs can be scheduled in multiple ways.
 +
** [[Self Service - Schedule Evergreen|Self Service]] in Schedule Evergreen
 +
** The Multimedia Lab L1404
 +
*** [https://helpwiki.evergreen.edu/wiki/index.php/Category:Multimedia_Lab Multimedia Lab information]
 +
** Media Loan
 +
*** Check the [https://www.evergreen.edu/medialoan/media-loan Media Loan website] for hours
 +
* Once a lab is scheduled you will need to check out a key from Media Loan.
 +
** Media Loan has limited hours.
 +
** You need to plan ahead and schedule time in advance so that you can check out the key from Media Loan.
 +
* It is your responsibility to confirm your reservation time.
 +
* If you need a substantial amount of time, contact animation staff for scheduling.
 +
* You may lose your scheduled time if you are more than 15 minutes late.
 +
* Please cancel any time that you will not use.
  
 
===Keys===
 
===Keys===
−
* Checkout a key from Media Loan prior to your reservation and return it promptly afterwards.  
+
* Check out a key from Media Loan prior to your reservation and promptly return it afterwards.
 +
** Media Loan has limited hours.  You will need to plan ahead.  
 
* Do not use keys to gain access outside of your scheduled time.
 
* Do not use keys to gain access outside of your scheduled time.
 
* You are financially responsible for the room and its contents.
 
* You are financially responsible for the room and its contents.
Line 27: Line 49:
 
===Support===
 
===Support===
 
Need Help?
 
Need Help?
−
Please do not attempt to unplug or re-wire anything, especially if you think you know what you are doing.  Check the Troubleshooting Guide and see if you can find your answers there.  Flip through the Log Book to see if anyone else has experienced the same problem and if a solution was found.  If that fails contact one of the following offices:
+
* '''Please do not attempt to unplug or re-wire anything, especially if you think you know what you are doing.'''  
−
+
* Flip through the Log Book to see if anyone else has experienced the same problem and if a solution was found.   
−
* Multimedia Lab, L1404, 360-867-5455
+
* Reports any lab problems by following the ''[[Report a Problem in a Media Lab|Report a problem in a media lab]]'' procedure. 
−
* Media Loan, L2502, 360-867-6253
+
* If that fails, contact one of the following offices:
−
* Aaron Kruse, L1520, 360-867-6842
+
** email animationsupport@evergreen.edu
−
* email at [http://www.evergreen.edu/scripts/contact.php?sm=animation&sub=Email%20from%20Animation%20Site&title=Contact%20Animation%20Staff animation@evergreen.edu]
+
** Multimedia Lab, L1404, 360-867-5455
 +
** Aaron Kruse, L1507, 360-867-6842
  
 
==Lab Peripherals==
 
==Lab Peripherals==
 +
===Computer===
 +
* Each lab has a Mac mini computer.
 +
* There's a memory reader and a USB 3 hub on the table below the computer.
 +
* Turn on the power switch that is in front of the computer.
 +
* Power on the computer by pressing the button on the back right corner of the computer.
 +
[[File:mainstand.jpg|thumb|right|alt=Alt text|The Main Animation Stand in the Com.]]
 
===Main Animation Stand===
 
===Main Animation Stand===
−
* The animation table is a compound table that uses calibrated gears and tracks to incrementally adjust N/E/S/W directions and rotation.   
+
* The animation table is a compound table that uses calibrated gears and tracks to incrementally adjust N/E/S/W directions, as well as rotation.   
−
* '''Never''' use sand, liquids, glitter, or other messy materials near or on this table as it will permanently damage it.
+
* '''Never''' use sand, liquids, glitter, or other messy materials near or on this table, as it will permanently damage it.
−
* If you need to use messy materials you must first contact animation staff and then use the Sand Stand (2D Multi-Use Lab only)
+
* If you need to use messy materials, you must first contact animation staff and then use the Messy Stand (COM 2D Multi-Use Lab only)
 +
* Zoom positioning is controlled by carefully adjusting the camera arm up/down by releasing the lock and slowly turning the crank. 
 +
* Do not over tighten the locks or pull on the track - use the provided cranks.
 +
 
 +
[[File:T5i.jpg|thumb|right|alt=Alt text|A Canon Rebel T5i with a Circular Polarizing Lens.]]
  
 
===Camera===
 
===Camera===
 
* A Canon Rebel is permanently attached to the top of the animation stand.   
 
* A Canon Rebel is permanently attached to the top of the animation stand.   
−
* All the menu and camera settings are adjusted through the Dragon Frame software.   
+
* Do not remove the camera from the stand or attempt to adjust any menu settings. 
−
* Do not remove the camera from the stand or attempt to adjust any settings.  
+
* All the menu and camera settings are adjusted through the Dragonframe software.   
−
* Turn the camera switch on during shooting, and switch it off when you are done.
+
* Make sure you double check that the camera is set in Manual ('''M''') and Auto-Focus ('''AF''').
 +
* Turn the camera switch on during shooting, and switch it off when you are done.
 +
* There are three things to do If the camera isn't working:
 +
** turn the camera '''OFF''' and then turn it back '''ON''' 
 +
** go to '<nowiki/>''Capture > '''Reset/Refresh Connections'<nowiki/>''''' 
 +
** press '''Cmd+R'''. to trigger '''Reset/Refresh Connections''' 
 +
* If neither of these solutions work, please contact the Multimedia Lab at 360-867-5455 or email animationsupport@evergreen.edu. 
  
 
===Lens===
 
===Lens===
 +
* The camera is installed with a 35mm prime lens and a linear polarizing filter. 
 +
* To reduce reflection/glare, adjust the polarizing filter rotation position without touching the surface with your fingers.
 +
** Do not remove the filter
 +
* To clean the lens use the lens cleaning tissue
 +
** You may put a drop of lens cleaner on the tissue
 +
** Please do not attempt to clean the lens surface with any cloth or paper towels.
 +
 
===Lights===
 
===Lights===
 +
* Overhead lights are adjusted at a 45 degree angle, and a backlight is located underneath the table. 
 +
* Turn on the lights using the provided power strips. 
 +
* To reduce any glare, make sure all room lights are off while shooting, and you can also wear black clothing to reduce any reflections.
 +
* If there is a burned-out bulb, contact the animation staff - '''do not''' replace burned out bulbs yourself.
 +
 
===Platen===
 
===Platen===
−
===Sand Stand===
+
The platen is an attachment to the Main Animation Stand that is used to flatten artwork.  This item is available by contacting animation staff.
−
===Rotoscoping Station===
+
 
 +
[[File:MessyStand.jpg|thumb|right|alt=Alt text|The Messy Stand]]
 +
 
 +
=== Com 2D Multi-Use Lab (Com 309) ===
 +
 
 +
====Messy Stand====
 +
* Located in the 2D Multi-Use Lab, Com 309, for animating sand and other messy liquid materials. 
 +
* Make sure the installed camera on the main animation stand is turned off.
 +
 
 +
==== Multiplane ====
 +
* There is a large Multiplane
 +
** Do not move it
 +
** Do not use without additional training
 +
 
 +
=== Library 2D Rotoscope Lab (L1408) ===
 +
 
 +
====Rotoscoping Station====
 +
* Do not use the rotoscoping station without training.
 +
** It's not covered in the regular proficiency.
 +
* See the [[Rotoscope_Station|Rotoscope Station]] article.
 +
 
 
===Acme Hole Punch===
 
===Acme Hole Punch===
−
===Computer===
+
* The Acme hole puncher is a calibrated registration system that is the industry standard.
 +
* Pre-punch materials before animating to ensure proper registration of your drawings. 
 +
* '''Do not punch more than 3 cels or 5 pages of paper at once, or use non-standard materials''' - they will clog the blades.
 +
* There is a hole punch in each 2D Lab, the Multimedia Lab (L1404), and the Design Lab (Com 408)
 +
* Please ask for assistance at the Media Services if the Acme Hole Punch is not working.
 +
 
 +
===File Management===
 +
* Save all your files in a folder the desktop. 
 +
* Files can be deleted at any time to free up space on the ORCA drive, and everything will be deleted on Thursday of Evaluation week. 
 +
* When you are done with your session, backup files to a server, a personal hard drive, or etc...
 +
* Do not work directly off of a server - only copy to or from it, and then disconnect from the server while working.
 +
* Make sure you eject your server before logging off.
 +
 
 
===General Use Expectations===
 
===General Use Expectations===
 +
* '''There are absolutely no food or drinks of any kind allowed in the labs.'''  Leave them stored outside the door. 
 +
* Take care of yourself and remember to take a break once in a while.
 +
* Please recycle your paper scraps in the corresponding bins. Garbage cans are located down the hall.
 +
* Clean up after yourself. There are cleaning supplies provided for your use next to the door.
 +
* Do not delete other peoples' files or mess with any settings, postings, in the lab or on the computer.
 +
* Do not unplug or remove anything from the space without asking - including cables or registration pegbar alike.
 +
*  Be courteous and respectful to the lab aides as well as your fellow animators, and abide by the campus code of conduct.  We are here to help you and make sure that everything is in working order so that everyone has equal access to these facilities.
 +
 +
==== Cleaning ====
 +
* There is glass cleaner and paper towels for cleaning glass
 +
* Len tissues and lens cleaner for the lens
 +
** Never use glass cleaner and paper towels on the lens or filters
 +
* Clean up after yourself
 +
 +
==== When you are done ====
 +
* Clean up and restore the room back to normal.
 +
* Log out of the logbook and record any notes.
 +
* Turn off the camera power, shut down the computer, overhead lights, room light, and equipment.
 +
* If you use the rotoscope monitor desk, please make you sure it is off before leaving.
 +
* Promptly return your keys to Media Loan before they are due.
 +
 +
===2D Lab Checklist===
 +
Every time you use the lab remember to follow the [[2D Lab Checklist|2D Lab checklist]].
  
 +
==Dragonframe==
 +
* [[Basic Animation 2D - Dragonframe | Basic Animation 2D]]
 +
* [[Focusing - Dragonframe | Focusing]]
 +
* [[Keypad Controls - Dragonframe | Keypad Controls]]
 +
* [[Onionskin - Dragonframe |Onionskin]]
 +
* [[Exporting - Dragonframe | Exporting]]
 
[[Category:Animation Labs]]
 
[[Category:Animation Labs]]

Latest revision as of 12:13, 2 October 2024

Intro

There are two 2D Animation Labs.

  • Both have the main animation stands set up identically.
  • The Library 2D Rotoscope Lab (L1408) has and additional rotoscoping set-up.
  • The Com 2D Multi-Use Lab (Com 309) has a second messy stand.
Alt text
The Log Book

Log Book

  • Every time you enter the lab please sign in and record the following information:
    • Your name
    • Materials used (paper, pencil, pen, paint, sand cut-out, etc....)
    • Equipment used (compound table, paper punch, computer, sand stand, rotoscope table)
    • Record any technical problems (so we can fix it)
    • Status of the lab: clean, messy, is anything missing or broken?
  • This is the main form of communication between you and the animation staff who maintain and audit the space every week. Failure to sign in to the Log Book will result in a loss of access privileges.
  • If there is an immediate issue, please contact the Multimedia Lab at 360-867-5455 or email animationsupport@evergreen.edu

Scheduling

Read the following articles

Media Labs Access Policy

Scheduling General Access Media Labs

  • You must always have time reserved when using the labs. Only use your scheduled time.
  • Students can only be in the labs during open building hours.
  • The labs can be scheduled in multiple ways.
  • Once a lab is scheduled you will need to check out a key from Media Loan.
    • Media Loan has limited hours.
    • You need to plan ahead and schedule time in advance so that you can check out the key from Media Loan.
  • It is your responsibility to confirm your reservation time.
  • If you need a substantial amount of time, contact animation staff for scheduling.
  • You may lose your scheduled time if you are more than 15 minutes late.
  • Please cancel any time that you will not use.

Keys

  • Check out a key from Media Loan prior to your reservation and promptly return it afterwards.
    • Media Loan has limited hours. You will need to plan ahead.
  • Do not use keys to gain access outside of your scheduled time.
  • You are financially responsible for the room and its contents.
  • Lost or stolen keys must be reported immediately to both Media Loan and Animation staff.

Support

Need Help?

  • Please do not attempt to unplug or re-wire anything, especially if you think you know what you are doing.
  • Flip through the Log Book to see if anyone else has experienced the same problem and if a solution was found.
  • Reports any lab problems by following the Report a problem in a media lab procedure.
  • If that fails, contact one of the following offices:
    • email animationsupport@evergreen.edu
    • Multimedia Lab, L1404, 360-867-5455
    • Aaron Kruse, L1507, 360-867-6842

Lab Peripherals

Computer

  • Each lab has a Mac mini computer.
  • There's a memory reader and a USB 3 hub on the table below the computer.
  • Turn on the power switch that is in front of the computer.
  • Power on the computer by pressing the button on the back right corner of the computer.
Alt text
The Main Animation Stand in the Com.

Main Animation Stand

  • The animation table is a compound table that uses calibrated gears and tracks to incrementally adjust N/E/S/W directions, as well as rotation.
  • Never use sand, liquids, glitter, or other messy materials near or on this table, as it will permanently damage it.
  • If you need to use messy materials, you must first contact animation staff and then use the Messy Stand (COM 2D Multi-Use Lab only)
  • Zoom positioning is controlled by carefully adjusting the camera arm up/down by releasing the lock and slowly turning the crank.
  • Do not over tighten the locks or pull on the track - use the provided cranks.
Alt text
A Canon Rebel T5i with a Circular Polarizing Lens.

Camera

  • A Canon Rebel is permanently attached to the top of the animation stand.
  • Do not remove the camera from the stand or attempt to adjust any menu settings.
  • All the menu and camera settings are adjusted through the Dragonframe software.
  • Make sure you double check that the camera is set in Manual (M) and Auto-Focus (AF).
  • Turn the camera switch on during shooting, and switch it off when you are done.
  • There are three things to do If the camera isn't working:
    • turn the camera OFF and then turn it back ON
    • go to 'Capture > Reset/Refresh Connections'
    • press Cmd+R. to trigger Reset/Refresh Connections
  • If neither of these solutions work, please contact the Multimedia Lab at 360-867-5455 or email animationsupport@evergreen.edu.

Lens

  • The camera is installed with a 35mm prime lens and a linear polarizing filter.
  • To reduce reflection/glare, adjust the polarizing filter rotation position without touching the surface with your fingers.
    • Do not remove the filter
  • To clean the lens use the lens cleaning tissue
    • You may put a drop of lens cleaner on the tissue
    • Please do not attempt to clean the lens surface with any cloth or paper towels.

Lights

  • Overhead lights are adjusted at a 45 degree angle, and a backlight is located underneath the table.
  • Turn on the lights using the provided power strips.
  • To reduce any glare, make sure all room lights are off while shooting, and you can also wear black clothing to reduce any reflections.
  • If there is a burned-out bulb, contact the animation staff - do not replace burned out bulbs yourself.

Platen

The platen is an attachment to the Main Animation Stand that is used to flatten artwork. This item is available by contacting animation staff.

Alt text
The Messy Stand

Com 2D Multi-Use Lab (Com 309) 

Messy Stand

  • Located in the 2D Multi-Use Lab, Com 309, for animating sand and other messy liquid materials.
  • Make sure the installed camera on the main animation stand is turned off.

Multiplane

  • There is a large Multiplane
    • Do not move it
    • Do not use without additional training

Library 2D Rotoscope Lab (L1408)

Rotoscoping Station

  • Do not use the rotoscoping station without training.
    • It's not covered in the regular proficiency.
  • See the Rotoscope Station article.

Acme Hole Punch

  • The Acme hole puncher is a calibrated registration system that is the industry standard.
  • Pre-punch materials before animating to ensure proper registration of your drawings.
  • Do not punch more than 3 cels or 5 pages of paper at once, or use non-standard materials - they will clog the blades.
  • There is a hole punch in each 2D Lab, the Multimedia Lab (L1404), and the Design Lab (Com 408)
  • Please ask for assistance at the Media Services if the Acme Hole Punch is not working.

File Management

  • Save all your files in a folder the desktop.
  • Files can be deleted at any time to free up space on the ORCA drive, and everything will be deleted on Thursday of Evaluation week.
  • When you are done with your session, backup files to a server, a personal hard drive, or etc...
  • Do not work directly off of a server - only copy to or from it, and then disconnect from the server while working.
  • Make sure you eject your server before logging off.

General Use Expectations

  • There are absolutely no food or drinks of any kind allowed in the labs. Leave them stored outside the door.
  • Take care of yourself and remember to take a break once in a while.
  • Please recycle your paper scraps in the corresponding bins. Garbage cans are located down the hall.
  • Clean up after yourself. There are cleaning supplies provided for your use next to the door.
  • Do not delete other peoples' files or mess with any settings, postings, in the lab or on the computer.
  • Do not unplug or remove anything from the space without asking - including cables or registration pegbar alike.
  • Be courteous and respectful to the lab aides as well as your fellow animators, and abide by the campus code of conduct. We are here to help you and make sure that everything is in working order so that everyone has equal access to these facilities.

Cleaning

  • There is glass cleaner and paper towels for cleaning glass
  • Len tissues and lens cleaner for the lens
    • Never use glass cleaner and paper towels on the lens or filters
  • Clean up after yourself

When you are done

  • Clean up and restore the room back to normal.
  • Log out of the logbook and record any notes.
  • Turn off the camera power, shut down the computer, overhead lights, room light, and equipment.
  • If you use the rotoscope monitor desk, please make you sure it is off before leaving.
  • Promptly return your keys to Media Loan before they are due.

2D Lab Checklist

Every time you use the lab remember to follow the 2D Lab checklist.

Dragonframe

Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=2D_Lab_Manual&oldid=45854"

The Evergreen State College